Q7 Max is the robot vacuum cleaner only, Q7 Max+ contains a robot vacuum cleaner and an auto-empty dock, which names Auto-Empty Dock Pure.

Temporarily Roborock has no plans to sell it separately.

It's incompatible.

The dimensions of Roborock Auto-Empty Dock are 442*306*425 mm (18 × 12.4 × 15.1 in). Please keep at least 0.5 m (1.6 ft) of clearance on either side, 1.5 m (5 ft) in front, and 1 m (3 ft) above.

The dustbin has a capacity of 2.5 L. It can generally be used for 45 days without emptying. To ensure optimal performance, clean the dustbin regularly or when the dust reaches the MAX mark.

1. The suction power of the fan is increased from 2000Pa to 4200Pa, the suction power is stronger, and the cleaning is more thorough;
2. However, it is suitable for the dust bag version of the automatic dust collecting and charging seat (OnyxC);
3. Add child lock mode: prevent children and pets from accidentally touching the buttons;
4. Constant humidity electric control water tank, 30-level regulation, soft glue water outlet (more precise control, more uniform water output);
5. Integrated design of dust box and water tank: adding water and dumping dust in one step, maintenance is more convenient;
6. The capacity of the water tank is increased from 290ml to 350ml: the wet mopping area is larger;
7. Added 3D map mode.

As your machine will inevitably be slightly scratched and impacted during use, it is subject to normal trace of use that will not present an impact on product performance.

The machine has the overall height of about 9.65cm and may not be applicable to areas where furniture is 11cm high or below.

The machine has the diameter of 353*350*96.5mm and may not be applicable to areas with width lower than 38 cm.

This is the side brush of the robotic vacuum cleaner. The side brush, when running, is mainly used to sweep waste along the wall or barrier up to the bottom of the main brush, which is then suctioned into the dust bin.

The structural member in the front side that can be compressed is a bumper. This is an important sensor structure that helps the machine to detect a barrier in the range of 180 degrees in the front. A barrier in the front can be effectively detected with a slight physical impact.

The protrusion portion set on the top is the core component of the machine, i.e. LDS (laser distance sensor). It rotates constantly at 300 RPM to obtain topographic data around the machine itself. Outside the laser distance sensor is its protective cover. On the bottom of the LDS top cover is the LDS cover bumper sensor which is capable of detecting any foreign matter that may get stuck in the laser head and of automatically returning back to prevent machine jamming.

Q7 MAX uses an electronically controlled water tank with a capacity of 350ml. The drawer type mop bracket is installed along the original drawer design of the stone sweeping machine. The sweeping and towing switch does not need to flip the fuselage or disassemble the water tank, which is convenient and quick. The mop support constant pressure mopping design, the mopping pressure is not affected by the amount of remaining water, ensuring the mopping effect. It has a larger capacity than the bionic water tank and a stronger downforce.

Both the upper cover and its joint point are made of resilient materials. The upper cover will not be easily broken except for malicious damage.

The In-Mold Decoration by Roller (IMR) technology is used for the upper cover such that the surface is very smooth and flat and will not be scratched except for malicious damages such as use of a hard object or pointed object.

As this is the highest point of the machine, it is hard to avoid being scratched by the bottoms of some furniture, but this will not present an impact on the machine performance. If you still care, you can make some circular films by yourself to protect it.

Firstly, the side brush of the robotic vacuum cleaner is mainly used to clean waste accumulated along a wall or at the root of an obstacle. The side brush is not a main cleaning structure when cleaning in other areas. For example, for non-wall cleaning, if the side brush always runs in high speed, it may make the waste fly about. The side brush can be dynamically regulated and the speed of the side brush will be reduced for non-wall cleaning to prevent waste flying about. Secondly, it is designed in such a way that only one side cleans against a wall or the root of an obstacle and the side brush is not required in the other side. Finally, if two side brushes are designed, when cables are twined, two side brushes running in reverse direction are more easily to be twined such that the machine can be easily twined. From the above, only one side brush is designed.

The charging dock should be set in such a way that about 0.5 m in left and right each, 1.5 m or more in the front are reserved, with its backside against the wall. It is generally recommended to set the charging dock in your living room that is generally spacious. Do not set the charging dock in a confined and congested place.

The machine is provided with a laser distance sensor, allowing the machine to automatically reduce its speed in most instances. In addition, the bottom of the machine is provided with a bumper strip. As impact is very slight at home, an additional bumper strip is not required. At the same time, if the ultrasonic sensor or wall sensor is blocked by your purchased bumper strip, the machine may not work normally.

Well, the machine works well on all these floors and will surely not scratch them.

The floating main brush structure of the machine is capable of fitting closely onto the floor to take waste into the dust bin; the high power fan provides high negative pressure to collect dust; the self-regulating side brush is capable of cleaning waste along the wall and in front of furniture; the path programming navigation algorithm allows the machine to cover all areas to clean; the combination of the features above ensures its good cleaning effectiveness.

It depends on operating time, room size, furniture arrangement, etc. In generally, it takes not more than 60 minutes to clean a 100 sq. m. room, and may be shorter if furniture is well arranged and there is little waste.

The power supply works well in the range of 100-240V/50-60HZ and thus can be used in overseas markets.

Yes. Please download Roborock app and connect it to your machine. On the Setting option, you can add timer operation. After setting, the set timer cleaning will not be affected regardless of whether the machine is connected to Wi-Fi.

It works well on undercoat or suede carpets, but may not be suitable for some shag carpets or dark carpets because shag carpets may block the cliff sensor on the bottom of the machine, thereby making the machine regard it as a cliff that it should avoid. This is also true for some dark carpets that may have good light absorption ability.

You can pause the machine midway and make it move in a small range. However, for a long movement distance, the machine may restart cleaning due to path programming failure.

Of course. All sensors attached on the machine body can work well in a completely black environment.

Only 2.4GHz Wi-Fi is supported; ways of encryption requiring input of user name like 5G and 802.1x are not supported.

Q7 MAX supports smart dust collection charging stand, you can choose to buy it.

No. All data is stored in your machine. User map or other data will surely not be uploaded to the server. If you check the Customer Experience Improvement Program, part of error logs will be uploaded to the server to help us further improve our products.

No. Firstly, the charging dock outputs no current except when the machine is connected; secondly, the charging dock without the machine has the output voltage of DC 4.2 V which is far less than 36 V, the safe voltage for human body; finally, please be assured that the charging dock is provided with short circuit and current leakage protection features such that it can be automatically powered off in abnormal situations.

When measuring at 1 m away, the sound level is between about 53 and 61 dB. It may have a slight difference depending on machine model.

About 240 minutes for 20->80%

The laser distance sensor has the precise ranging scope within 6 m and has the precision accurate to ±1% of error within 3 m, that is, less than 1 cm in 1 m.

It is designed in accordance with IEC 60825-1:2014 laser safety level Class 1 and will not generate hazardous radiation. Please be assured that this is tested in TÜV Rheinland in Germany and described in the Manual.

A world-class brushless fan manufactured by NIDEC is used, with the suction capacity up to 4200 Pa.

No. If the dust bin is left uncleaned for a prolonged period of time, the machine will give a voice prompt to ask you to clean the dust bin and your mobile phone will also send you a message to ask you to clean the dust bin. Dust full sensors used in other commercially available products are easily blocked by dust and thus frequently make misjudgment that the dust bin is full.

Charging stops after the battery is full. The motherboard is powered directly from the charging dock and the battery is in standby mode and thus the battery performance will not be affected. The machine has very low power consumption (less than 3 W) when it is inoperative. To maintain the best performance of the battery, please try to keep the machine interfaced on the charging dock when it is left unused.

It depends on operating time, floor material and mode of operation. For a common floor without a carpet, the machine in full charge state can work for about 2.5 hours in standard mode, shorter time in Strong mode and longer time in Silent mode.

All electric motors are provided with a motor overload protection mechanism, including side brush motor, main brush motor, main wheel motor, LDS motor and vacuum cleaner fan motor.

The side brush can be dynamically regulated and works at 330 RPM along a wall and 130 RPM in other conditions. The main brush works at 1350 RPM while the vacuum cleaner fan in standard mode works at 12000 RPM.

Lithium battery with capacity of 5200 mAh and voltage rating of 14.4 V.

No. The machine will automatically return to the charging dock after cleaning for recharging, and in full charge state, the machine is directly powered by the charging dock and will not consume the battery power. This is beneficial to extend the service life of the battery.

The machine itself will not fail to work due to an error and can still works without the main brush, but, without the main brush, the cleaning effect is reduced. This is not recommended.

The electronically controlled water tank adopts a precision micro-controlled peristaltic pump, which has a longer service life, anti-clogging, more precise water output control, and three-speed adjustable water volume.
More intelligent: do not spray water when not moving, do not spray water when slipping, get out of trouble and other abnormal situations, to prevent the floor from soaking. Only spray water when cleaning, not when recharging.

When the machine is online, you could add up to 10 No-go zones, 10 No-map zones and 10 Virtual walls separately. The No-go zones and the Virtual walls can be overlapped.

Q7 MAX does not support physical virtual walls. If you need to set virtual walls or restricted areas, please open the map save and set software virtual walls or restricted areas in the map.

Yes. After flushing, please thoroughly dry and reinstall them in place, especially for the filter; otherwise, you may have to clean up it.

Yes. The Roborock robotic vacuum cleaner is provided with a washable filter. When the dust collection effect is affected due to seriously dirty filter, flush the filter with tap water but not to use a cleaner or brush. Dry it thoroughly before use.